snmp-server contact
Command Mode
Description
Syntax
Systems
Document No. 10-300090, Issue 1
Global Configuration.
Sets the administrative contact for the switch. The switch displays the
administrative contact when you enter the show snmp command. The
default setting is System Administrator. The no command restores the
default setting.
To Configure:
To Restore
Default:
Table 25-3. Parameters, Keywords, Arguments
Parameter
<contact-name>
P580 and P882.
snmp-server contact <contact-name>
no snmp-server contact
Definition
The name of the administrative contact for the switch.
The contact name can range from 1 to 127 characters.
SNMP
25-5