Set Port Allow-Learning - Avaya 106760804 Command Reference Manual

set port allow-learning

Command Mode
Description
Syntax
Sample Output
Systems
Document No. 10-300090, Issue 1
Global Configuration.
Disables or enables learning for a specified switch port or all switch ports
on a specified module.
To Enable: set port allow-learning {<mod-num> | <mod-swport-
range>}[...,{<mod-num> | <mod-swport-range>}] enable
To Disable: set port allow-learning {<mod-num> | <mod-swport-
range>}[...,{<mod-num> | <mod-swport-range>}] disable
Table 21-3. Parameters, Keywords, Arguments
Name
<mod-num>
<mod-swport-range>
The following example enables VLAN learning for the second switch port
on the module in slot 3 and switch ports 7 through 11 on the module in slot
5.
(configure)# set port allow-learning 3/2,5/7-11 enable
Port allow-learning set: 3/2,5/7,5/8,5/9,5/10,5/11
P550R, P580, P880, and P882.
Definition
Specifies the number of the module where the ability of
every switch port on that module to learn new VLANs is
enabled or disabled.
Specifies a range of switch ports whose ability to learn
new VLANs is enabled or disabled.
Port
21-5