Chapter 21
set port spanning-tree-mode
Command Mode
Description
Syntax
Sample Output
Systems
21-40
Global Configuration.
Enables or disables spanning tree mode for specified switch ports.
To Enable:
set port spanning-tree-mode {<mod-num> | <mod-swport-
range>}[...,{<mod-num> | <mod-swport-range>}] enable
To
set port spanning-tree-mode {<mod-num> | <mod-swport-
Disable:
range>}[...,{<mod-num> | <mod-swport-range>}] disable
Table 21-34. Parameters, Keywords, Arguments
Name
<mod-num>
<mod-swport-
range>
The following example enables the spanning tree mode for the second
switch port on the module in slot 3 and switch port 7 through 11 on the
module in slot 5 of an Avaya Multiservice Switch.
(configure)# set port spanning-tree-mode 3/2,5/7-11 enable
Port spanning-tree-mode set: 3/2,5/7,5/8,5/9,
5/10,5/11
P550R, P580, P880, and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Definition
Specifies the number of the module where the spanning
tree mode is to be enabled or disabled for every switch
port on the module.
Specifies a range of switch ports whose spanning tree
mode is to be enabled or disabled.