Set Spantree Config - Avaya 106760804 Command Reference Manual

set spantree config

Command Mode
Description
Syntax
Sample Output
Systems
Document No. 10-300090, Issue 1
Global Configuration.
Sets the Spanning Tree Protocol configuration. The default setting is per-
VLAN.
set spantree config {ieee | per-vlan | dual-layer | disable}
Table 28-7. Parameters, Keywords, Arguments
Name Definition
ieee The entire switch is a single IEEE 802.1D-compliant bridge.
per-vlan Each VLAN functions as a separate IEEE 802.1D-compliant
bridge. VLAN bridges can only be displayed when in per-
vlan or dual-layer mode.
dual-layer A proprietary version of per-VLAN, where the vlan id is
embedded as a tag within the bridge PDUs.
disable Disables spanning tree on the switch.
The following example sets the spanning tree protocol to ieee.
(configure)# set spantree config ieee
Config successfully set to ieee
P550R, P580, P880, and P882.
Rapid Spanning Tree Protocol
28-11