Table of Contents
Advertisement
Chapter 3
appletalk admin-state
Command Mode
Description
Syntax
Sample Output
Systems
3-6
Interface Configuration.
Set the administrative state of an Appletalk Interface. The default value is
up.
appletalk admin-state {up | down}
Table 3-4. Parameters, Keywords, Arguments
Name
Definition
{up | down}
The administrative state of an Appletalk interface.
The following example sets the Appletalk administrative state to down.
(config-if:serial0)# appletalk admin-state down
P550R, P580, P880, and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
• up - The administrative state of the interface is active.
• down - The administrative state of the interface is
inactive.
Advertisement
Table of Contents
