Table of Contents
Advertisement
show intelligent-multicast static-client
Command Mode
Description
Syntax
Sample Output
Systems
Document No. 10-300090, Issue 1
User.
Displays all statically configured client ports for a given Intelligent
Multicast session.
* Note: If a static session is created with vlan all, then you must specify
vlan all to see the clients. If a static session is created with an
IP address, then you cannot use the MAC address to see the
clients.
show intelligent-multicast static-client {<group-address> | mac-address
<mac-address>} vlan {all | <vlan-id> | name <vlan-name>}
Table 10-21. Parameters, Keywords, Arguments
Name
Definition
<group-address>
The IP address of the multicast group.
<mac-address>
The MAC address associated with this entry:
vlan
The choices are:
The following example displays the Intelligent Multicast client ports for the
multicast session created with all VLANs.
> show intelligent-multicast static-client 225.1.1.2 vlan all
IM
ClientPort
---- -----------
1
3.2
P550R, P580, P880, and P882.
• all - The static session or client is created for all
VLANS.
• vlan-id - A session or client is created for a specific
VLAN only identified by numerical ID.
• name - A session or client is created for a specific
VLAN only identified by VLAN name.
Application
-------------------
Mgmt : 225.1.1.2
Intelligent Multicast
10-37
Advertisement
Table of Contents
