set port ignore-tag-priority
Command Mode
Description
Syntax
Document No. 10-300090, Issue 1
Global Configuration.
Sets a port to ignore any layer 2 tag priority (including 802.1p tags). The
default setting is off.
To Enable:
set port ignore-tag-priority {{<mod-num> | <mod-swport-
range>}[...,{<mod-num> | <mod-swport-range>}] |
all-ports} on
To Disable:
set port ignore-tag-priority {{<mod-num> | <mod-swport-
range>}[...,{<mod-num> | <mod-swport-range>}] |
all-ports} off
Table 23-10. Parameters, Keywords, Arguments
Name
<mod-num>
<mod-swport-range>
all-ports
{on | off}
Definition
The slot number of a module. If you specify
<mod-num>, the switch ignores tag priorities
on all ports of the module.
The slot number of a module, and, either a
port number, or a range of port numbers
having the format Px-Py. For example:
• To specify port 1 on the module in slot
3, enter 3/1.
• To specify ports 1 through 5 on the
module in slot 3, enter 3/1-5.
If you specify <mod-swport-range>, the
switch ignores tag priorities on the port or
range of ports on the module in the slot that
you specify.
All ports in the chassis. If you specify all-
ports, all ports on all modules in the chassis
are set with the same priority.
Indicates whether you want the port to ignore
tag priority. Enter on for the port to ignore the
tag priority.
80-Series QoS
23-19