Chapter 19
area ase-filter
Command Mode
Description
Syntax
Sample Output
Systems
19-4
OSPF Router Configuration.
Enables the filtering of type 3 ASE LSAs into an OSPF Area. To disable the
filtering of type 3 ASE LSAs, use the no form of this command.
To Enable:
area <area-id> ase-filter
To Disable:
[no] area <area-id> ase-filter
Table 19-2. Parameters, Keywords, Arguments
Name
Definition
<area-id>
IP address that represents the area-id for the system.
The following command enables filtering of type 3 ASE LSAs into the
indicated OSPF Area.
(configure router:ospf)# area 2.0.0.0 ase-filter
P550R, P580, P880, and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1