Ipx Route - Avaya 106760804 Command Reference Manual

Chapter 13

ipx route

Command Mode
Description
Syntax
Sample Output
Systems
13-20
Global Configuration.
Adds a static route to the routing table. The no form of this command
removes a route from the routing table.
To ipx route {<network> | default} <network.next-hop-
Configure: node> [<ticks> [<hops>]]
To Remove: [no] ipx route {<network> | default} <network.next-
hop-node>
Table 13-8. Parameters, Keywords, Arguments
Name Definition
{network |
default}
<network.next- Network number and node address of the next hop to the server.
hop-node>
<ticks> Number of IBM clock ticks of delay to the network for which
you are establishing a static route. The range is 1 to 32000.
<hops> Number of hops to the network for which you are establishing a
static route. The range is 1 to 16.
The following example adds a static route to the routing table.
(configure)# ipx route 50 100.02:e0:3b:00:45:63
P550R, P580, P880, and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
• network - an eight-digit hexadecimal number that
identifies the network on which you are establishing a
static route.
The range is 1 to FFFFFFFD and leading zeros can be
omitted (for 000000BB, enter BB).
• default - creates a static entry for the default-route.
• next-hop-node - The argument node is the node number
of the target Novell server. This is a 48-bit value
represented by a MAC address (aa:bb:cc:dd:ee:ff).