Timers Spf - Avaya 106760804 Command Reference Manual

timers spf

Command Mode
Description
Syntax
Sample Output
Systems
Document No. 10-300090, Issue 1
Global Configuration.
Configures the delay time (seconds) between runs of OSPF's SPF
calculation. Use the no form of this command to restore the default (3
seconds). The valid range is 3 to 65535.
To Configure:
To Restore Default:
Table 19-25. Parameters, Keywords, Arguments
Name Definition
<spf-holdtime> The time in seconds of the delay between runs of OSPF's SPF
calculation. The range is:
minimum - 3
maximum - 65535
The following command sets the spf holdtime to 60 seconds.
(configure)# timers spf 60
P550R, P580, P880, and P882.
timers spf <spf-holdtime>
[no] timers spf
OSPF
19-37