Redistribute - Avaya 106760804 Command Reference Manual

redistribute

Command Mode
Description
Syntax
Document No. 10-300090, Issue 1
Router Configuration (RIP or OSPF).
Creates an IP redistribute list entry.
IP redistribute list entries control the distribution of static, local, or
dynamically learned routes from one protocol to another protocol. Route
redistribution is supported only by dynamic routing protocols, such as RIP
and OSPF.
* Note: Selecting OSPF as the destination protocol causes OSPF
adjacencies to be reestablished. During this reestablishment, a
temporary loss of traffic occurs.
To Redistribute Routes to
RIP:
To Redistribute Routes to
OSPF:
To Delete an Entry that
Redistributes Routes to
RIP:
To Delete an Entry that
Redistributes Routes to
OSPF:
redistribute {ospf | local | static}
[<access-list-name>]
* Note: You must be in RIP Router
Configuration mode to enter
this command.
redistribute {rip | local | static} [<access-
list-name>]
* Note: You must be in OSPF Router
Configuration mode to enter
this command.
no redistribute {ospf | local | static}
* Note: You must be in RIP Router
Configuration mode to enter
this command.
no redistribute {rip | local | static}
* Note: You must be in OSPF Router
Configuration mode to enter
this command.
IP
11-51