Table of Contents
Advertisement
ip netbios-rebroadcast
Command Mode
Description
Syntax
Sample Output
Systems
Document No. 10-300090, Issue 1
Interface Configuration.
Enables NETBIOS rebroadcasts on an interface. The no form of this
command disables NETBIOS rebroadcasts on an interface (default).
To Enable:
ip netbios-rebroadcast [{both | inbound | outbound |
disable}]
To Disable:
no ip netbios-rebroadcast
Table 11-18. Parameters, Keywords, Arguments
Name
{both | inbound |
outbound | disable}
The following example enables NETBIOS rebroadcasts and accepts only
INBOUND broadcasts on an interface labeled "boston".
(config-if:boston)# ip netbios-rebroadcast inbound
P550R, P580, P880, and P882.
Definition
Indicates how broadcasts are accepted.
• both - inbound and outbound broadcasts are
accepted.
• inbound - only inbound broadcasts are accepted.
• outbound - only outbound broadcasts are
accepted.
• disable - no broadcasts are accepted.
IP
11-33
Advertisement
Table of Contents
