Table of Contents
Advertisement
Chapter 21
set port rate-limit-burst-size
Command Mode
Description
Syntax
Sample Output
Systems
21-34
Global Configuration.
Sets the rate limit burst size for fast ethernet ports.
* Note: Setting this parameter on any M5548-100TX port sets all
physical ports on the module to the same value.
set port rate-limit-burst-size {<mod-num> | <mod-port-range>}
[...,{<mod-num> | <mod-port-range>}] {1 | 2 | 4 | 8 | 16 | 32 | 64 | 128 | 256
| 512 | 1024 | 2048}
Table 21-29. Parameters, Keywords, Arguments
Name
<mod-num>
<mod-port-range>
{1 | 2 | 4 | 8 | 16 | 32 |
64 | 128 | 256 | 512 |
1024 | 2048}
The following example sets the rate limit burst size for the second fast
ethernet port and ports 7-11 on the module in slot 5 to 512.
(configure)# set port rate-limit-burst-size 5/2,5/7-11 512
Port rate limit burst size set: 5/2,5/7,5/8,5/9,
5/10,5/11
P550R, P580, P880, and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Definition
Specifies the number of the module where the rate limit burst
size for each fast ethernet port on the module is to be set.
Specifies the range of fast ethernet where the rate limit burst
size is to be set.
The rate limit burst size options.
Advertisement
Table of Contents
