Table of Contents
Advertisement
Chapter 7
ip dvmrp prune-message-lifetime
Command Mode
Description
Syntax
Sample Output
Systems
7-8
DVMRP Router Configuration.
Sets the DVMRP prune message lifetime. Use the no form of this command
to return to the default value of 7200 seconds.
To Configure:
ip dvmrp prune-message-lifetime <prune-lifetime>
To Restore
[no] ip dvmrp prune-message-lifetime
Default:
Table 7-6. Parameters, Keywords, Arguments
Name
Definition
<prune-lifetime>
The DVMRP upstream prune message lifetime. The
message lifetime is measured in seconds. The valid range is
100-7,200 seconds. The default setting is 7,200 seconds.
The following example configures the IP DVMRP prune message lifetime
for fifteen hundred seconds.
(configure router:dvmrp)# ip dvmrp prune-message-lifetime
1500
P550R, P580, P880, and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Advertisement
Table of Contents
