Ipx Type-20-Propagation - Avaya 106760804 Command Reference Manual

Chapter 13

ipx type-20-propagation

Command Mode
Description
Syntax
Sample Output
Systems
13-34
Interface Configuration.
Specifies whether or not an IPX interface accepts and forwards IPX type 20
propagation packet broadcasts. The default setting is disabled.
To Enable: ipx type-20-propagation {both | inbound | outbound}
To Disable: ipx type-20-propagation disabled
Table 13-16. Parameters, Keywords, Arguments
Name Definition
{both | inbound |
outbound}
The following example forwards type 20 propagation broadcast packets to
other network segments on an interface labeled "boston".
(config-if:boston)# ipx type-20-propagation outbound
P550R, P580, P880, and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
• both - The interface accepts and forwards type 20
propagation broadcast packets. This is the default.
• inbound - The interface only accepts type 20
broadcast packets.
• outbound - The interface only forwards type 20
propagation broadcast packets to other network
segments.
• disabled - The interface does not accept or forward
type 20 propagation broadcast packets.