Set Spantree Maxage - Avaya 106760804 Command Reference Manual

Chapter 28

set spantree maxage

Command Mode
Description
Syntax
28-18
Global Configuration.
Sets the maximum amount of time that the bridge retains bridging
information. When the maximum age expires, the bridge assumes it has lost
connection to the network and sends out requests to be readded to the
spanning tree.The default age time is 20 seconds.
set spantree maxage <maxage-value> {802.1D | vlan {<vlan_id> name
<vlan-name>}}
Table 28-12. Parameters, Keywords, Arguments
Name
<maxage-value>
802.1D
<vlan-id>
<vlan-name>
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Definition
The maximum amount of time that the bridge retains
bridging information. When the maximum age expires,
the bridge assumes it has lost connection to the network
and sends out requests to be readded to the spanning tree.
The valid range for this field is 6 to 40 seconds. The
default setting is 20 seconds.
Use this keyword if the switch is running IEEE 802.1D
Spanning Tree. For a detailed description of IEEE 802.1D
Spanning Tree, see Chapter 7, "Configuring Rapid
Spanning Tree," in User Guide for the Avaya P580 and
P882 Multiservice Switches, Software Version 6.1.
The VLAN ID of the bridge.
Use the vlan <vlan-id> keyword and variable when the
switch is running per-VLAN or dual-layer Spanning Tree.
For a detailed description of per-VLAN and dual-layer
Spanning Tree, see Chapter 7, "Configuring Rapid
Spanning Tree," in User Guide for the Avaya P580 and
P882 Multiservice Switches, Software Version 6.1
The VLAN name of the bridge.
Use the vlan name <vlan-name> keyword and variable
when the switch is running per-VLAN or dual-layer
Spanning Tree. For a detailed description of per-VLAN
and dual-layer Spanning Tree, see Chapter 7,
"Configuring Rapid Spanning Tree," in User Guide for
the Avaya P580 and P882 Multiservice Switches,
Software Version 6.1