Set Diffserv Priority - Avaya 106760804 Command Reference Manual

Chapter 23

set diffserv priority

Command Mode
Description
Syntax
Sample Output
Systems
23-16
Global Configuration.
Assigns a priority to a DiffServ code point (DSCP) in the DiffServ Mapping
Table.
set diffserv priority <priority> dscp <dscp-start-range> [<dscp-end-
range>]
Table 23-8. Parameters, Keywords, Arguments
Name
<priority>
<dscp-start-range>
[<dscp-end-range>]
The following command sets a priority of 7 to DSCPs 15 through 63.
(configure)# set diffserv priority 7 dscp 15 63
P550R and P880, 80-series modules only.
P580 and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Definition
The priority that you want to assign. Enter a
number between 0 and 7.
The first DSCP in the range of DSCPs that
you want to assign the priority to. DSCPs
range from 0 to 63.
The last DSCP in the range of DSCPs that you
want to assign the priority to. DSCPs range
from 0 to 63.