Table of Contents
Advertisement
Chapter 19
passive-interface
Command Mode
Description
Syntax
Sample Output
Systems
19-28
OSPF Router Configuration.
Prevents OSPF from sending routing updates across the network. To disable
passive interface, use the no form of this command.
To Enable:
passive-interface {<interface-name> | <ip-address>}
To Disable:
[no] passive-interface {<interface-name> | <ip-
address>}
Table 19-20. Parameters, Keywords, Arguments
Name
<interface-name>
<ip-address>
The following command enables passive interface on the interface labeled
boston with an ip address of 10.0.7.123.
(configure router:ospf)# passive-interface boston 10.0.7.123
P550R, P580, P880, and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Definition
Name of the interface on which OSPF runs.
IP address of the interface on which OSPF runs.
Advertisement
Table of Contents
