Ipx Rip-Multiplier - Avaya 106760804 Command Reference Manual

ipx rip-multiplier

Command Mode
Description
Syntax
Sample Output
Systems
Document No. 10-300090, Issue 1
Interface Configuration.
Sets the interval at which a network's RIP entry ages out. The no form of
this command restores the default. The default value is three times the RIP
update interval.
To Configure:
To Restore Default:
Table 13-7. Parameters, Keywords, Arguments
Name Definition
<multiplier> The multiplier used to calculate the interval at which RIP routing
table entries age out. This can be any positive number.
The value you specify is multiplied by the RIP update interval to
determine the aging-out interval.
The following example sets the IPX RIP age-out interval on an interface
labeled "boston" to 40.
(config-if:boston)# ipx rip-multiplier 40
P550R, P580, P880, and P882.
ipx rip-multiplier<multiplier>
[no] ipx rip-multiplier
IPX
13-19