Table of Contents
Advertisement
Chapter 28
set spantree portcost
Command Mode
Description
28-20
Global Configuration.
Sets the path cost for this port. The ports that you prefer be used by the
spanning tree should have the lowest path cost.
If the switch is running common Spanning Tree, the valid range for this
field is 0 to 65535.
If the switch is running Rapid Spanning Tree, the valid range for this field is
0 to 200,000,000.
The default setting is 0. If this field is set to 0, the port uses the default path
cost for the bridge.
Common Spanning Tree defaults are:
10 Mbps port—100
100 Mbps port —19
1Gbps port—4
10 Gpbs port—3
Rapid Spanning Tree defaults are:
10 Mbps port—2,000,000
100 Mbps port—200,000
1 Gbps port—20,000
10 Gbps port—2,500
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Advertisement
Table of Contents
