Set Buffering Fabric-Port (Hipri-Alloc) - Avaya 106760804 Command Reference Manual

set buffering fabric-port (hipri-alloc)

Command Mode
Description
Syntax
Sample Output
Systems
Document No. 10-300090, Issue 1
Global Configuration.
Set the input or output buffer high priority allocation percentage. The
default percentage value is 20%.
* Note: The switch must be rebooted for changes to this parameter to
take effect.
set buffering fabric-port <fabric-port-spec> [routing] {input | output} hipri-
alloc {10 | 20 | 30 | 40 | 50}
Table 4-2. Parameters, Keywords, Arguments
Name
<fabric-port-spec>
[routing]
{input | output}
hipri-alloc
The following example sets the buffer high priority allocation percentage
for fabric port 4/1 to 30%.
(configure)# set buffering fabric-port 4/2 routing output hipri-
alloc 30
Buffers for fabric-port 4/2 set.
P550R, P580, P880, and P882.
Definition
Enter a particular fabric port or a range of fabric ports on
a module.
Set the routing buffer parameters.
Input or output buffering.
The high priority allocation percentage values are: 10,
20, 30, 40, or 50.
Buffering
4-3