Table of Contents
Advertisement
ip bootp-dhcp circuit-info
Command Mode
Description
Syntax
Systems
Document No. 10-300090, Issue 1
Global Configuration.
Enables BOOTP/DHCP option 82, suboption 1 (circuitID). The no
command disables option 82, suboption 1.
This suboption identifies the slot and physical port number from which the
DHCP request was received. The default setting is disabled.
* Note: Before you enter this command, make sure that the switch is set
to be a BOOTP/DHCP relay agent. Use the
command to enable BOOTP/DHCP relay agent on the switch.
To Enable:
ip bootp-dhcp circuit-info
To Disable:
no ip bootp-dhcp circuit-info
P550R, P580, P880, and P882.
IP
ip bootp-dhcp relay
11-13
Advertisement
Table of Contents
