set vlan
Command Mode
Description
Systems
Document No. 10-300090, Issue 1
Global Configuration.
Creates a VLAN or modifies the name of an existing VLAN. The clear
command deletes a VLAN.
If the VLAN that you specify does not exist, this command creates the
VLAN. If the VLAN that you specify does exist, this command renames the
VLAN and ignores any optional arguments that you enter.
To Configure:
set vlan <vlan-id> [name <vlan-name>] [autoincrement-
HT-size {true | false}] [init-HT-size <size>]
To Delete:
clear vlan {<vlan-id> | name <vlan-name>}
Table 33-2. Parameters, Keywords, Arguments
Name
<vlan-id>
[name <vlan-name>]
[autoincrement-HT-
size {true | false}
[init-HT-size <size>]
P550R, P580, P880, and P882.
Definition
The VLAN ID.
The VLAN name.
Specifies whether the AFT hash table associated with this
VLAN can grow when the table is full. The default setting
is true.
Specifies the initial hash table size. The table size can be
16, 32, 64, 128, 256, 512, 1024, 2048, 4096 or 8192. The
default setting is 1024.
VLAN
33-3