ip igmp query-timeout
Command Mode
Description
Syntax
Sample Output
Systems
Document No. 10-300090, Issue 1
Interface Configuration.
Sets the time that needs to elapse from the time the last query was heard
before this router takes over as a designated querier for the interface. The no
form of this command restores the default value of 255 seconds.
To Configure:
To Restore Default:
Table 9-5. Parameters, Keywords, Arguments
Name
Definition
<nbr-qry>
The neighbor group querier timeout in seconds. The range is 30-
600 seconds. The default setting is 255 seconds.
The following example configures the time out period before the router
takes over as the querier on an interface labeled "boston" to 250 seconds.
(config-if:boston)# ip igmp query-timeout 250
P550R, P580, P880, and P882.
ip igmp query-timeout <nbr-qry>
[no] ip igmp query-timeout
IGMP
9-9