Ip Rip Authentication Mode - Avaya 106760804 Command Reference Manual

Chapter 12

ip rip authentication mode

Command Mode
Description
Syntax
Sample Output
Systems
12-4
Interface Configuration.
Specifies the type of authentication mode used in RIP Version 2 packets.
Use the no form of this command to restore the default value of none.
To Configure:
To Restore Default:
Table 12-3. Parameters, Keywords, Arguments
Name
{simple | md5 | none}
The following example specifies md5 the type of authentication mode to
use for interface labeled "boston".
(config-if:boston)# ip rip authentication mode md5
P550R, P580, P880, and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
ip rip authentication mode {simple | md5 | none}
no ip rip authentication mode
Definition
The authentication type used in RIP Version 2 packets.
Types include:
• simple - clear text authentication.
• md5 - keyed MD5 authentication.
• none - No authentication.