Ip Ospf Router-Id - Avaya 106760804 Command Reference Manual

ip ospf router-id

Command Mode
Description
Syntax
Sample Output
Systems
Document No. 10-300090, Issue 1
Global Configuration.
Sets the router-id for the system. Use the no command to restore the default
setting (the lowest IP address configured on the system).
* Note: OSPF must be disabled for this command to take effect. If
OSPF is enable on the system the change will not take effect
until OSPF is stopped and started again.
To Configure:
To Restore Default:
Table 19-17. Parameters, Keywords, Arguments
Name Definition
router-id IP address that represents the router-id for the system.
The following command sets the router id for interface 123 to 10.0.8.123.
(config-if:123)# ip ospf router-id 10.0.7.123
P550R, P580, P880, and P882.
ip ospf router-id <router-id>
[no] ip ospf router-id
OSPF
19-25