Ip Ospf As-Boundary-Router - Avaya 106760804 Command Reference Manual

Chapter 19

ip ospf as-boundary-router

Command Mode
Description
Syntax
Systems
19-12
Global Configuration.
* Important: This command is not supported by v6.0 and later
application software.
Version 6.0 and later application software automatically detects the ASBR
status:
If route redistribution filters are configured for OSPF, the ASBR
status is enabled.
If all interfaces on the switch are in an OSPF stub area, the ASBR
status is disabled, regardless of whether route redistribution filters are
configured.
For more information on route redistribution filters, see "Configuring Route
Redistribution" in Chapter 12, "Configuring IP Routing" of User Guide for
the Avaya P580 and P882 Multiservice Switches, Software Version 6.1.
In earlier versions of application software, this command specifies if the
router is an autonomous-system boundary router (ASBR). Use the no form
of this command to disable ASBR status. The default state is disabled.
To Enable:
To Disable:
P550R, P580, P880, and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
ip ospf as-boundary-router
[no] ip ospf as-boundary-router