Ipx Send-Receive-Mode - Avaya 106760804 Command Reference Manual

Chapter 13

ipx send-receive-mode

Command Mode
Description
Syntax
Sample Output
Systems
13-30
Interface Configuration.
Sets the RIP/SAP send and receive characteristics of the IPX interface. The
no form of this command restores the default, which is talk-listen.
To ipx send-receive-mode {rip | sap} {talk-only | listen-only
Configure: | talk-listen}
To Restore [no] ipx send-receive-mode {rip | sap}
Default:
Table 13-13. Parameters, Keywords, Arguments
Name
{rip | sap}
{talk-only | listen-
only | talk-listen}
The following example sets the RIP send-receive characteristics for an
interface labeled "boston" to talk-listen.
(config-if:boston)# ipx send-receive-mode rip talk-listen
P550R, P580, P880, and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Definition
Specify RIP or SAP and indicate the send-receive
characteristic:
• talk-only - RIP or SAP only transmits updates on the
interface and does not receive them. Does not send
RIP or SAP requests.
• listen-only - RIP or SAP only receives updates on
the interface and does not transmit them.
• talk-listen - RIP or SAP transmits and receives
updates on the interface.