Table of Contents
Advertisement
Chapter 16
set syslog facility
Command Mode
Description
Syntax
16-16
Global Configuration.
Sets the event types, also called "facilities," for which syslog events are
generated.
The no command stops generating syslog events for the event type that you
specify. The default setting is {system | config | switch_fabric}.
To Enable:
set syslog facility {start | system | config | temp |
resource | fan | service_port | user _port | power |
bridge_stat | switch_fabric | ospf | rip | ldap | appletalk
| auth_failure | redundant_cpu | dvmrp | cli | snmp |
unknown_mac | vrrp | login_status | acl_log | ssl_ssh |
all}
To Disable:
no set syslog facility {start | system | config | temp |
resource | fan | service_port | user _port | power |
bridge_stat | switch_fabric | ospf | rip | ldap | appletalk
| auth_failure | redundant_cpu | dvmrp | cli | snmp |
unknown_mac | vrrp | login_status | acl_log | ssl_ssh |
all}
* Note: Use the
logging protocol event
event logging for specific protocols.
Table 16-7. Parameters, Keywords, Arguments
Name
start
system
config
temp
resource
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
command to enable protocol
Definition
Logs starts of the system.
Logs system events.
Logs each configuration change (for example,
enabling and disabling ports).
Logs changes in temperature status. Temperature
status messages could precede a switch shutdown,
and are often critical.
Logs changes in system resources.
1 of 3
Advertisement
Table of Contents
