Table of Contents
Advertisement
Chapter 12
ip rip send version
Command Mode
Description
Syntax
Sample Output
Systems
12-8
Interface Configuration.
Specifies a RIP version to send on an interface basis. Use the no form of this
command to restore the default setting of RIP Version 1.
To Configure:
To Restore Default:
Table 12-6. Parameters, Keywords, Arguments
Name
Definition
[1] [2]
The version of the RIP packets sent out the interface.
• 1 - send RIP Version 1 packets.
• 2 - send RIP Version 2 packets
The following specifies that the interface labeled "boston" send RIP version
2 packets.
(config-if:boston)# ip rip send version 2
P550R, P580, P880, and P882.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
ip rip send version [1] [2]
no ip rip send version
Advertisement
Table of Contents
