Table of Contents
Advertisement
Chapter 13
ipx service
Command Mode
Description
Syntax
13-32
Global Configuration.
Specifies static SAP entries. To remove static SAP entries, use the no form
of this command. The default is that no static services are defined.
To
ipx service <service-type> <service-name> <network>
Configure:
<node> <socket> <network.next-hop-node> [<hops>]
To Disable:
[no] ipx service <service-type> <service-name>
Table 13-15. Parameters, Keywords, Arguments
Name
Definition
<service-type>
The number of the type of the service. The range is 0-FFFF.
<service-name>
Name of the server that provides the service. The range is 1 to
47 bytes long.
<network>
An eight-digit hexadecimal number that uniquely identifies a
network cable segment. It can be a number in the range 1 to
FFFFFFFD. You do not need to specify leading zeros in the
network number. For example, for the network number
000000AA you can enter AA.
<node>
The node number of the target Novell server. This is a 48-bit
value represented by a MAC address (aa:bb:cc:dd:ee:ff).
<socket>
The socket number for this service. The range is 0 - FFFF
<network.next-
Network number and node address of the next hop to the
hop-node>
server.
<next-hop-node> - The argument node is the node number of
the target Novell server. This is a 48-bit value represented by
a MAC address (aa:bb:cc:dd:ee:ff).
<hops>
Number of hops to the server. The range is 1-16.
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Advertisement
Table of Contents
