appletalk mac-format
Command Mode
Description
Syntax
Sample Output
Systems
Document No. 10-300090, Issue 1
Interface Configuration.
Sets which Appletalk Interface MAC format is to be used. The default value
is snap. The no form of this command resets the MAC format for the
interface to the default value.
To Configure:
To Restore Default:
Table 3-7. Parameters, Keywords, Arguments
Name
Definition
{ethv2 | snap}
The following example sets the Appletalk Interface MAC format to ethv2.
(config-if:serial0)# appletalk mac-format ethv2
P550R, P580, P880, and P882.
appletalk mac-format {ethv2 | snap}
[no] appletalk mac-format
• ethv2 - Ethernet Version 2.
• snap - Subnetwork Access Protocol.
Appletalk
3-9