Ldap Search-Base - Avaya 106760804 Command Reference Manual

ldap search-base

Command Mode
Description
Syntax
Sample Output
Systems
Document No. 10-300090, Issue 1
Global Configuration.
Defines the Lightweight Directory Access Protocol (LDAP) search base.
The no form of this command removes a search base definition.
The search base default is ou=Devices, ov=CajunRules, o=Avaya.
* Note: If LDAP has not been configured, there is no default.
To Enable: ldap search-base <search-base-dn>
To Disable: [no] ldap search-base <search-base-dn>
Table 15-1. Parameters, Keywords, Arguments
Name Definition
<search-base-dn> The Distinguished Name (DN) that defines the start point
of the search.
Note: The name you enter must start and end with
The following example sets an LDAP search base to avaya.com.
(configure)# ldap search-base "o"
P550R, P580, P880, and P882.
quotation marks.
LDAP
15-3