Table of Contents
Advertisement
Sample Output
Systems
Document No. 10-300090, Issue 1
Table 13-12. Parameters, Keywords, Arguments
Name
Definition
{filter | allow}
The action to take for the IPX service.
<filter-hops>
The number of hops to get to the service in the service table
(inbound SAP packets) or in the advertised information
(outbound SAP packets). The range is 0 to 16 hops.
The following example:
sets the SAP name filter precedence to 1
sets the filter-network to 3
sets the service-type to 2
applies filters to SAP packets in both directions (both)
adds the service to the service table (allow)
sets the filter hops to 4
on an interface labeled "boston".
(config-if:boston)# ipx sap-network-filter 1 3 2 both allow 4
P550R, P580, P880, and P882.
• filter - Do not add the service to the service table
(inbound SAP packets) or do not advertise the service
(outbound SAP packets).
• allow - Add the service to the service table (inbound
SAP packets) or advertise the service (outbound SAP
packets).
IPX
2 of 2
13-29
Advertisement
Table of Contents
