snmp-server location
Command Mode
Description
Syntax
Systems
Document No. 10-300090, Issue 1
Global Configuration.
Sets the physical location of the switch. The switch displays the physical
location of the switch when you enter the show snmp command. The no
command clears the location.
To Configure:
snmp-server location <server-location>
To Clear:
no snmp-server location
Table 25-6. Parameters, Keywords, Arguments
Parameter
<server-location>
P580 and P882.
Definition
The physical location of the switch. The location can
range from 1 to 127 characters.
SNMP
25-9