D-Link xstack DGS-3620 series Reference Manual page 346

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
10 0.757858
Output truncated...
DGS-3620-28PC:admin#
20-48 debug bgp show interface_info
Description
This command is used for displaying current interface information in BGP protocol stack.
Format
debug bgp show interface_info
Parameters
None.
Restrictions
Only Administrator-level users can issue this command. (EI Mode Only Command)
Example
Configure BGP to show current interface information:
DGS-3620-28PC:admin# debug bgp show interface_info
Command: debug bgp show interface_info
Interface Information:
Name Index Network
---- ---- ------------
System 0001 30.30.30.30/8
DGS-3620-28PC:admin#
20-49 debug bgp show as_path_access_list
Description
This command is used for displaying current BGP as path access list configuration in BGP protocol
stack.
Format
debug bgp show as_path_access_list
Flags Status
----- ------
0 Up
341