D-Link xstack DGS-3620 series Reference Manual page 379

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To add an IP destination address to the switch's DHCP relay table:
DGS-3620-28PC:admin#config dhcp_relay add ipif System 10.43.21.12
Command: config dhcp_relay add ipif System 10.43.21.12
Success.
DGS-3620-28PC:admin#
22-3 config dhcp_relay delete ipif
Description
This command is used to delete an IP destination address from the switch's DHCP relay table.
Format
config dhcp_relay delete ipif <ipif_name 12> <ipaddr>
Parameters
<ipif_name 12> - Enter the name of the IP interface which contains the IP address below.
<ipaddr> - Enter the DHCP/BOOTP server IP address.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete an IP destination address from the switch's DHCP relay table:
DGS-3620-28PC:admin#config dhcp_relay delete ipif System 10.43.21.12
Command: config dhcp_relay delete ipif System 10.43.21.12
Success.
DGS-3620-28PC:admin#
22-4 config dhcp_relay option_60 add string
Description
This command is used to configure the Option 60 relay rules. Note that different strings can be
specified with the same relay server, and the same string can be specified with multiple relay
servers. The system will relay the packet to all the matching servers.
Format
config dhcp_relay option_60 add string <multiword 255> relay <ipaddr> [exact-match |
partial-match]
374