D-Link xstack DGS-3620 series Reference Manual page 400

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
<pool_name 12> - Enter the DHCP pool name.
<domain_name 64> - (Optional) Specifies the domain name of the client.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the domain name option of the DHCP pool:
DGS-3620-28PC:admin#config dhcp pool domain_name nyknicks nba.com
Command: config dhcp pool domain_name nyknicks nba.com
Success.
DGS-3620-28PC:admin#
23-8 config dhcp pool dns_server
Description
This command is used to specify the IP address of a DNS server that is available to a DHCP client.
Up to three IP addresses can be specified on one command line. If DNS server is not specified,
the DNS server information will not be provided to the client. If this command is input twice for the
same pool, the second command will overwrite the first command.
Format
config dhcp pool dns_server <pool_name 12> {<ipaddr> {<ipaddr> {<ipaddr>}}}
Parameters
<pool_name 12> - Enter the DHCP pool name.
<ipaddr> - (Optional) Specifies the IP address of the DNS server. Up to three IP addresses can
be specified on one command line.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the DNS server's IP address:
DGS-3620-28PC:admin#config dhcp pool dns_server nyknicks 10.10.10.1
Command: config dhcp pool dns_server nyknicks 10.10.10.1
Success.
DGS-3620-28PC:admin#
395