Debug Config State - D-Link xstack DGS-3620 series Reference Manual
Layer 3 managed stackable gigabit switch
Hide thumbs
Also See for xstack DGS-3620 series:
- Reference manual (1333 pages) ,
- Manual (1170 pages) ,
- Product manual (502 pages)
Table of Contents
Advertisement
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To set the switch to not need a reboot when a fatal error occurs:
DGS-3620-28PC:admin# debug config error_reboot disable
Command: debug config error_reboot disable
Success.
DGS-3620-28PC:admin#
20-7
debug config state
Description
Use the command to set the state of the debug.
Format
debug config state [enable | disable]
Parameters
enable - Enable the debug state.
disable - Disable the debug state.
Restrictions
Only Administrator level users can issue this command.
Example
To set the debug state to disabled:
DGS-3620-28PC:admin# debug config state disable
Command: debug config state disable
Success.
DGS-3620-28PC:admin#
20-8
debug show error_reboot state
Description
Use the command to show the error reboot status.
Format
debug show error_reboot state
304
Advertisement
Table of Contents
