Show Bfd - D-Link xstack DGS-3620 series Reference Manual
Layer 3 managed stackable gigabit switch
Hide thumbs
Also See for xstack DGS-3620 series:
- Reference manual (1333 pages) ,
- Manual (1170 pages) ,
- Product manual (502 pages)
Table of Contents
Advertisement
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
This example show how to configure the desired minimum TX interval value to 100 milliseconds
and detection time multiplier to 5 on the interface System.
DGS-3620-28PC:admin# config bfd ipif System min_tx_interval 100 multiplier 5
Command: config bfd ipif System min_tx_interval 100 multiplier 5
Success.
DGS-3620-28PC:admin#
11-4
show bfd
Description
This command is used to display the BFD information on the Switch.
Format
show bfd {ipif <ipif_name 12>}
Parameters
ipif - (Optional) Specifies the IP interface to display.
<ipif_name 12> - Enter the IP interface's name here. This name can be up to 12 characters
long.
Restrictions
None.
Example
This example show how to display the BFD information.
162
Advertisement
Table of Contents
