D-Link xstack DGS-3620 series Reference Manual page 48

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28PC:admin# config 802.1x max_users 2
Command: config 802.1x max_users 2
Success.
DGS-3620-28PC:admin#
3-15 config 802.1x reauth
Description
This command is used to reauthenticate the device connected with the port. During the
reauthentication period, the port status remains authorized until failed reauthentication.
Format
config 802.1x reauth [port_based ports [<portlist> | all] |mac_based ports [<portlist> | all]
{mac_address <macaddr>}]
Parameters
port_based ports - The switch passes data based on its authenticated port.
<portlist> - Enter a range of ports to be configured.
all - Specifies to configure all ports.
mac_based ports - The switch passes data based on the MAC address of authenticated
RADIUS client.
<portlist> - Enter a range of ports to be configured.
all - Specifies to configure all ports.
mac_address - (Optional) Specifies the MAC address of the authenticated RADIUS client.
<macaddr> - Enter the MAC address here.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To reauthenticate the device connected with the port:
DGS-3620-28PC:admin# config 802.1x reauth port_based ports all
Command: config 802.1x reauth port_based ports all
Success.
DGS-3620-28PC:admin#
3-16 create 802.1x guest_vlan
Description
This command is used to assign a static VLAN to be a guest VLAN. The specific VLAN which is
assigned to a guest VLAN must already exist. The specific VLAN which is assigned to the guest
VLAN can't be deleted.
43