D-Link xstack DGS-3620 series Reference Manual page 98
Layer 3 managed stackable gigabit switch
Hide thumbs
Also See for xstack DGS-3620 series:
- Reference manual (1333 pages) ,
- Manual (1170 pages) ,
- Product manual (502 pages)
Table of Contents
Advertisement
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
<ipif_name 12> - Enter the IP interface name used here.
<ipaddr> - Enter the IPv4 address used here.
<ipv6addr> - Enter the IPv6 address used here.
none - Specifies to revert to the default route table for all outgoing RADIUS packet.
Restrictions
Only Administrator level can issue this command.
Example
To specify an interface as the source interface for all outgoing RADIUS packets.
DGS-3620-28PC:admin#config radius source_ipif if_v200
Command: config radius source_ipif if_v200
Success.
DGS-3620-28PC:admin#
4-48
show radius source_ipif
Description
This command is used to display specified source interface for all outgoing RADIUS packets.
Format
show radius source_ipif
Parameters
None.
Restrictions
Only Administrator level can issue this command.
Example
To display specified source interface for all outgoing RADIUS packets.
DGS-3620-28PC:admin#show radius source_ipif
Command: show radius source_ipif
IP Interface
IPv4 Address
IPv6 Address
DGS-3620-28PC:admin#
: if_v200
: None
: None
93
Advertisement
Table of Contents
