Simatic Pdm; Commissioning With Simatic Pdm; Operating Via Simatic Pdm; Functions In Simatic Pdm - Siemens SITRANS F FST030 Operating Instructions Manual

SIMATIC PDM

B.1

Commissioning with SIMATIC PDM

B.1.1

Operating via SIMATIC PDM

SIMATIC PDM is a software package used to commission and maintain process devices.
B.1.2

Functions in SIMATIC PDM

Note
- For a complete list of parameters, see the Function Manual.
- While the device is in PROGRAM mode the output remains fixed and does not respond to
changes in the device.
SIMATIC PDM monitors the process values, alarms and status signals of the device. It
allows you to display, compare, adjust, verify, and simulate process device data; also to set
schedules for calibration and maintenance.
Parameters are identified by name and organized into function groups. See the Function
Manual for the complete HMI structure
PDM (Page 132) for more details.
See Parameters accessed via drop-down menus (Page 133) for parameters that do not
appear in the menu structure in SIMATIC PDM.
: The menu structure for SIMATIC PDM is almost identical to that for the HMI.
1)
B.1.3

Supported SIMATIC PDM versions

Note
Supported SIMATIC PDM versions
The EDD supporting this product is compatible with SIMATIC PDM v. 8.2 + SP1 and higher.
SITRANS F Ultrasonic flowmeters FST030 (HART)
Operating Instructions, 08/2017, A5E35971532-AC
and Changing parameter settings using SIMATIC
1)
B
125