About Saving And Registering Svp Credentials - HPE XP7 User Manual

Screen element
SNMP Settings
IP Address / Hostname
SNMP Community Name
Performance Advisor Monitor Settings
Email Address
Email Subject
DB Configuration
Current database size
Configured Maximum Database Size The maximum database size that you can configure for PA
Disk Space available on drive where
Database exists
User Settings
Event Log > Log events severity
TimeZone > Current TimeZone
Data Analysis > Response Time (in
Days)

About saving and registering SVP Credentials

You can register the SVP of an array with the respective management station that has PA monitoring
these disk arrays. It is required if you want PA to directly collect data from the array through the array
SVP.
The registration process is unique to each management station, where only one instance of the
registration is possible from every management station. To complete the registration for an array SVP,
provide the IP address of that SVP. After registration, the IP address is automatically available for that
array when you initiate an outband mode of configuration collection.
Description
The IP address or host name of the SMTP server.
Community name (Public or Private) for the SNMP server
Recipient email address to which PA Management Station
service failure notification is sent.
Subject line for PA Management Station service failure
notification.
The current database size for PA on the Management Station.
You can increase the PA database size based on the disk space
available on the management station, where PA is installed.
database.
The remaining disk space on the drive where PA database is
installed.
Option to set severity level for events generated in the Event log.
Option to select a time zone for your management station.
Option to set the duration to predict the average read and write
response time of LDEVs.
About saving and registering SVP Credentials 111