HPE XP7 User Manual page 257

Screen components
Avg Host Port IO
Avg Host Port MB
CLPR Usage %
Write Pending %
Side File %
MP Blade Util %
RG Util %
Port Performance Data
Screen components
CA-Port
Attribute
Avg IO
Avg MB
Performance Summary
Screen components
DKC
DKC Time
RG Time
Description
Displays the average host port assigned per I/O based on the
selected volume type (S-VOL or P-VOL).
Displays the average host port assigned per MB based on the
selected volume type (S-VOL or P-VOL)
Displays the total percentage of CLPR data usage that is
configured for the selected volume type (S-VOL or P-VOL)
Displays the percentage of data pending to be written on an
LDEV from the CLPR that is configured for the selected volume
type (S-VOL or P-VOL)
Displays the utilization of the side file shown as a percentage for
a CLPR that is configured for the selected volume based on the
volume type (S-VOL or P-VOL)
Displays the average utilization of the MP Blade that is
configured for the selected volume based on the volume type (S-
VOL or P-VOL)The MP Blade average utilization data is
collected during the DKC performance data collection. The
collection frequency set for the DKC data collection might be
different from that set for the LDEV data collection.
Displays the total utilization of each RAID Group which is
configured for the volume based on the volume type (S-VOL or
P-VOL).
Description
Displays the port assigned for the continuous access activity
Displays the type of the port, such as the Fibre (Cont Acc
Initiator), or Fibre (Ext-Lun Initiator)
Displays the average I/O rate
Displays the average throughput
Description
Displays the storage array serial number
Displays the average DKC time
Displays the average RG time
Table Continued
Virtual Storage Machine 257