View Custom Groups - HPE XP7 User Manual

The selected set of LDEV records are included in the custom group and the new custom group is
listed in the Custom Group filter. You can view the custom group details by clicking Actions > View
Custom Group.
Using custom group filters
You can also use the following custom group filters to view specific set of LDEV records in the Custom
Groups table:
• Arrays
• ACPs
• Hosts
• Ports
• RGs
The selection in each filter is independent of the selection in other filters. Example, if a P9500 array is
selected from the Arrays list, the Ports and ACPs lists are not updated to display only the ports and ACPs
that belong to array P9500. The filter will still display all the ports and the ACPs that belong to all the
monitored XP and XP7 disk arrays.
To filter and view specific set of LDEV records:
1. Select the values from the above-mentioned custom group filters, and click Apply.
The existing set of LDEV records are filtered based on the filter criteria and displayed in the Custom
Groups table.
Click Clear, if you want to restore the default settings across the Custom Groups filters. This action
also displays all the LDEV records in the Custom Groups table. The Custom Groups screen is
refreshed when you click Clear.
2. Provide a name for the custom group, and click Create Custom Group if you want to save the custom
group.

View Custom Groups

Procedure
1. From the HPE XP7 Performance Advisor main menu, click Summary View > Component >
Custom Group.
2. Under the Custom Group filter, select the custom group that you want to view.
3. Click Actions > View Custom Group. All the LDEVs which are part of the selected custom group are
displayed in the View Custom Group page.
View Custom Groups 237