HPE XP7 User Manual page 249

Screen elements
Journal ID
Journal Status
RPO (sec)
Detail pane > Chart View: Metrics
RPO
Journal Utilization
Description
Each pair relationship between journals is called a "mirror". A
mirror ID identifies a pair relationship between journals. When
the pair is created, it is assigned a mirror ID. Example: JID-mirror
ID.
State of the journal group, can be one of the following:
• JSTAT_SMPL: The journal volume that is configured but not
assigned to a pair
• JSTAT_NONE: The specified JID does not exist
• JSTAT_P(S)JNN: P(S)vol Journal Normal Normal
• JSTAT_P(S)JSN: P(S)vol Journal Suspend Normal
• JSTAT_PJNF: P(S)vol Journal Normal Full
• JSTAT_P(S)JSF: P(S)vol Journal Suspend Full
• JSTAT_P(S)JSE: P(S)vol Journal Suspend Error including link
failure.
For more information on the journal group, refer the following:
The difference between the data write times for the primary and
secondary volumes. It is represented in terms of seconds.
The difference between the data write times for the primary and
secondary volumes. It is represented in terms of seconds.
Displays the utilization rate of the journal.
Table Continued
Journals 249