HPE XP7 User Manual page 238

Table 27: View Custom Group screen details
Screen elements
DKC
Array Type
Host ID
Device File
Port
Port Type
SLPR
CLPR
LDEV
LUSE Status
LUSE master
238 Summary view
Description
Displays the IDs of the selected XP and XP7 disk arrays.
Displays the type of the selected XP disk array (for example,
XP24000, XP7 or P9500).
Displays the IDs for the selected hosts.
Displays the XP disk array device file names that are pointing
to the selected host.
If an XP disk array is connected to a host that has a host agent
installed for HP-UX 11i v3 operating system, the DSF is
displayed in a new format. A legacy DSF is displayed in
parentheses next to the new format.
Displays the identification numbers of the selected ports.
The port type, such as Fibre or FCoE (applicable only for XP7
disk arrays).
A disk array can be shared with the multiple organizations and
with multiple departments within an enterprise. Use Disk/
Cache Partition to allocate all components of one disk array (all
ports and CLPRs) to virtual disk arrays called SLPRs.
CLPRs are disk arrays cache memory, partitioned to use as
virtual cache memory across multiple hosts or applications.
Displays the identification numbers of the selected logical
devices.
Displays one of the following for a selected LDEV:
• Blank field = Not a LUSE
• M = A LUSE master
• C = A LUSE component port
NOTE: LUSE is not supported for XP7 arrays
Displays the LDEV ID of the LUSE master, if the selected
LDEV is a LUSE component. If the LDEV is not a LUSE
component, this field is blank.
Table Continued