HPE XP7 User Manual page 209

configuration data includes the P-VOL, S-VOL, and associated port, RAID Group details. If the P-VOLs
and S-VOLs are configured based on the CTGs to which they belong, the configuration data of journal
groups that manage the corresponding I/O transactions are also displayed. To view the continuous
access data for an XP/XP7 disk array, navigate to the main menu, click Summary, and then click
Continuous Access . Then, select the XP/XP7 disk array from the Array menu. The table below
describes the data displayed:
Table 19: Continuous Access configuration data
Screen element
Primary Array
PVOL
Secondary Array
SVOL
Pair Status
Volume Type
Provision Type
Description
Serial number of the primary array (primary data center).
LDEV configured as P-VOL on the primary data center. Displays
the LDEV number in cu:ldev format.
Serial number of the secondary array.
LDEV configured as S-VOL on the secondary data center.
Displays the LDEV number in cu:ldev format.
Current replication link status of the P-VOL or S-VOL on the
selected array. The replication link status shown is
corresponding to the Continuous Access transactions happening
on the selected disk array, and can be one of the following:
• SMPL
• COPY
• PAIRED
• Pair Suspend
• Pair Suspend Error
• Pair DUB
• Reverse Copy
• Pair SideFile 30% over
• Pair SideFile over Suspend
• SVOL Swap ready Suspend
• Unknown
Type of volume (PVOL or SVOL) configured on the primary data
center.
Thick or Thin, indicates virtual volume or physical LDEV.
Table Continued
Summary view 209