HPE XP7 User Manual page 93

Screen elements
TimeStamp
Frequency
Status
Performance Collection
Schedule Name
Status
Performance Collection Frequency
DKC, RG, Port
Performance Collection Timestamp
DKC, RG, Port
Description
Displays as 0 if the configuration collection is not yet initiated for
an array.
After the configuration data collection is complete, the
TimeStamp displays the latest date and time when PA receives
the complete configuration data from the arrays.
Displays as none if the configuration collection is not yet
scheduled or a one-time configuration data collection is
performed on the array.
For configuration collection, the frequency of the collection
schedule depends on the schedule time which you set in the
Create Config page. For example, if you set Collection Schedule
as Weekly, day as Sunday, and Start Time as 5 hours, it
indicates that PA collects the configuration collection for the
array, every week on all Sunday at 5 AM. The schedule type and
duration (date and time stamp) are displayed under Frequency,
only if you have scheduled the configuration data collection.
Hover the pointing device over the status icon to know the
status, which is displayed as a tool tip. The configuration
collection (one-time or scheduled) status displays one of the
following statuses: Collection Success, Collection in Progress,
Not Yet Done, or Collection is Failed.
Click Status to sort and display the array on top for which you
are issuing config collection.
Displays the schedule name that you have provided for the
specified performance collection cycle.
Displays the status of the Performance Collection Schedule.
Hover the pointing device over the status icon to know the
status, which is displayed as a tool tip.
Displays the frequency of performance collection schedule in
minutes for DKC, RG, and Port components. In performance
collection, frequency indicates the time interval in minutes for
which the performance data is updated. For example, if you
have set the Frequency for the Ports component as 4 in the
Create/Edit Perf page, it indicates that the performance
collection for Ports is updated at every 4-minute interval.
Displays the date and time when PA receives the complete
performance data from the XP/XP7 disk array for the DKC, RG,
and Port components.
Collection Schedules 93